Use code WELCOME5 at checkout. Minimum order $50+.
Please see the instructions below on how to properly hang our two different shelf types. :)
For bracketed shelves:
Tools needed - drill, Philips screwdriver bit, level
- Locate the included baggie of mounting screws in your order. There will be (4) screws per shelf.
- Place your shelf with the brackets against the wall facing downwards.
- Drill in the first screw on the upper left hand side. Before drilling in the remaining screws, you'll want to adjust the shelf up or down so that it is leveled. Use a level if you have one so that it is perfectly straight.
- Hold the shelf tightly where you have it leveled, and drill in the remaining screws.
* We recommend (but it is not necessary) to drill directly into a wall stud if possible, or using drywall anchors for extra strength (not included).
For shelves with a hanger on the back:
Tools needed - drill, Philips screwdriver bit, level
- Locate the included hardware clip and screws. Place the clip with the "tongue" shape facing upwards on your wall.
- Level the piece against your wall and use the screws to drill in each side until secure.
- The attached clip on your shelf will slide and latch onto the hardware installed on your wall.
For any further assistance please feel free to contact us. We 're happy to help!