Use code WELCOME5 at checkout. Minimum order $50+.
Properly mounting your pegboard is easy! We include all necessary screws and spacers. Please see instructions below.
Tools needed - drill (or screwdriver), level
1. Locate the included baggie of mounting screws in your order. There will be (3) sets of screws, spacers, washers and lock clips per pegboard. You must use all three for proper mounting, to ensure your pegboard stays in place.
2. Grab your screw and put the washer (round silver piece) on first.
3. Figure out where you want your pegboard to be placed on the wall.
4. This next part can be tricky, but don't worry! Grab your pegboard and place the screw (with washer attached) inside one of the holes. We recommend using the top or side holes to ensure stability.
5. Turn your pegboard around (with the screw still in the hole), grab your spacer (thick, round black piece) and place it on the other side of the screw. The lock clip (the last piece, a round black piece with jagged inner edges) can be attached to the screw as well.
6. Holding steady, you can now screw the entire piece into your wall.
7. Once the first pegboard hole is secured to your wall, repeat step #2. Place the spacer and lock clip behind the next hole you want to use (top or side hole) and screw into your wall.
For any further assistance please feel free to contact us. We 're happy to help!